We are trading in - Bitument 150

Oxidized Bitumen 150/5 is produced by either Continuous or Staggered Blowing Process. Heated Penetration Grade Bitumen under controlled environment is blown with air which controls the Oil Content in the Bitumen while it oxidized. The different grades for suited applications produced are designated by two numbers to indicate the mid-points of their softening point and penetration ranges.

Blown Asphalt 150/5 is based on Petroleum bitumens which made by Blowing Bitumen 60/70 by hot air. Bitumen 150/5 means: softening point is 150°c and penetration is 15 desi millimeter is produced in compliance also conformity with ASTM standard. This type of bitumen is hard and fragile.
In addition, heating of hard bitumen oxide should be arranged via hot oil by circulation inside of the isolated jacket. Our Oxidized Bitumen 150/5 also provides in any grade.

RAHA Bitumen Co. is also capable of producing other grades of Oxidized Bitumen according to the specifications of individual clients. Some of the major advantages of Oxidized Bitumen are that it is completely water resistant, highly flexible and durable. Further, it is chemically very stable. Oxidized bitumen is a very flexible compound that is not only chemically stable but also a very durable compound apart from being completely water resistant. Lastly, Oxidized Bitumen has some very prominent technical advantages that makes it a very sought after compound in various applications.

Bitumen
virgin_oilD6

Uses of Blown Bitument 150/5

Oxidized Bitumen 150/5 is widely used as an anti-slip layer compound in the piling industry, for the manufacture of roofing felts, for sound dampening felts and under carriage sealant in the automobile industry, electric cable joint protection, joint filling compound, sealant compound and many others.

It’s using as raw material for Bitumen coat, roofing, insulation also in Isolation bitumen membrane sheet. Also Oxidized Bitumen 150/5 uses in chemical, fuel, paints, lacquers, varnishes, paper-pulp-board, textile processing. In road construction, pavement, crack seal and repairmen, civil works, roofing also construction. In addition, it uses for sealing and insulating buildings, adhesive, construction materials additive, dust-binding, coating. With the wide range uses in the insulating and impregnating agent, make rubber and plastic products.

The Bitumen 150/5 products are for paving, roofing. Also used in asphalt-based paints for corrosion protection of metals, inlining public works structures, adhesives in electrical laminates, base for synthetic turf. Typical uses for Oxidized Bitumen 150/5 also include roofing, pipe coating, PoBtland cement pavement, hydraulic applications, paint manufacturing.

Technical Advantages of Blown Bitumen 150/25

  • Durability
  • Flexibility
  • Water Resistant
  • Chemical Stability

Compared to paving grade bitumen:

  • Reduced temperature susceptibility
  • Exhibits a more ‘solid’ nature at ambient temperatures
  • High penetration index

Storage & Handling

Heating of packaged bitumen is a critical phase in most of the final uses. Typically, the packaged material is heated and melted in boilers out on site.
However, control at the heating phase is very imPoBtant in terms of health and safety as well as in maintaining the quality of the product.

Note must be taken of the maximum safe handling temperature of 230 C and this should not be abused. Bitumen is a poor conductor of heat, consequently, control of the heating phase is of paramount imPoBtance.

The Oxidized Bitumen material should be broken up prior to placement in the boiler. This exposes a larger surface area to the heat and encourages a more even heating regime. Without the larger exposed surface area, aggressive heating at the base and sides of the boiler may well result in localized overheating, altering the characteristics of the RAHA modified bitumen and potentially causing thermal cracking of the bitumen, creating the release of low lash vaPoBs. The flash point of the oxidized bitumen then becomes irrelevant; as these low flash vaPoBs determine the fire risk.
Melted bitumen should not be left in the boiler and reheated from cold, as there is then a high potential for localized overheating around the heating area (lack of convection means poor heat transfer) and potential development of a pressurized pocket of low flash vaPoBs.

Be aware of the placement of any temperature monitoring or control devices. As a result of the poor thermal conductivity of the bitumen, a thermometer in the bitumen some distance from the heat source could read significantly different (even hundreds of degrees) from the true temperature of the bitumen near the heat source.

Health & Safety

Workers should wear protective masks, gloves, and goggles during application. The asphalt can be removed from equipment and tools with kerosene or gasoline. Care should be taken when heating oxidized Bitumen 150/5 to avoid over heating

Packing of Oxidized Bitumen 150/5

RAHA GROUP is the manufacturer of oxidized bitumen 150/5 in various packing, including bitumen 150/5 is available in 20 & 50 Kg Kraft Paper Bags / Poly Amide Bags, 25 Kg Carton box & 150, 180 & 200 kg Steel Drums.